Pro Comp Suspension Light Harness Switch Kit

Have you ever seen all of those 3W LED CREE bulbs that are lined up like cute little soldiers all along the front of your SEL Light Bar that is made by Pro Comp?  All of them look like they are just itching to begin lighting up the trails brilliantly – and you are probably equally excited to turn them on under the moon light.  The only problem is that there isn’t a way to turn them on.  So that you will be able to put these little soldiers to work, you will need the LED Light Harness Switch Kit that is another Pro Comp creation.

When you have this kit you will be able to forget all about unspooling all those yards of wire and heating up the soldering iron.  You will have everything that you need to be able to link your light bar into your existing 12V system.  This wiring harness has been designed specifically to be compatible with the SEL Light Bar made by Pro Comp.  It also has an in line fuse and a 40 amp relay so that the juice can keep flowing while your lights are protected from power surges.

This lighting kit that carries the Pro Comp name makes it incredibly easy for you to be able to tap into the power supply in your rig.  It also provides you with a great way to power your light bar…with a switch located in the cab.  All you need to do is to choose a spot on your dash and then screw the switch in using the hardware that is included with the kit and you are ready to go.  Wanna know the best part?  This comes with a warranty too!

Features at a Glance

·         This Light Harness Switch Kit comes to you complete with a warranty that is good for a full 90 days

·         Includes a 40 amp relay

·         Includes an inline fuse that will assist in protecting your lights from power surges

·         The included striker plate and in cab switch mean that it will be easy as 1 2 3 to turn your light bar on and off

·         Compatible with your 12V electrical system

·         Comes to you complete with all of the hardware as well as all of the connectors that will be required for a safe and proper installation and connection to your SEL bar

This Light Harness Switch Kit is Pro Comps way of making things easier for you.  Whether you are on the trail, or driving down the dirt road that leads you home, you will be able to have better visibility when you can actually turn your light bar on once this kit has been properly installed.

Pro Comp Suspension 2.5 Inch Lift Kit with ES9000 Shocks

This suspension system that is brought to you by the minds at Pro Comp is meant for use on the Jeep WranglerJK, the Unlimited and the Jeep Rubicon with model years falling between 2007 and 2015.  It is compatible with the 2 door models as well as the 4 door models.  The front end lift is achieved by the use of lifted coil springs and the rear lift is achieved the same way.  Everything that you will need in order to complete the installation safely and properly is included in this kit.  You will even get the ES9000 shocks as well as the shock boots for both the front of the Jeep and the rear of the Jeep.  With this suspension lift on your Jeep, you will be able to accommodate tires of up to 35 inches in diameter and a wheel size of up to 16 inches.

Pro Comp makes suspension systems and components for off road vehicles.  They don’t just make them though, they are off road enthusiasts themselves.  Each one of the products that they make reflect the type of technology that is not just driven by customers, it is technology that has been race inspired.  The engineering involved has tunnel vision on techniques and processes used for manufacturing that are actually world class.  When it involves how your Jeep handles, looks and performs, you don’t make any sort of compromises and neither does Pro Comp.  Whether you happen to be in the middle of town or out on the trails somewhere, a suspension system made by Pro Comp will get you where you are going and back again.

With this 2.5 inch suspension kit that carries the Pro Comp name, you will get the expected 2 and a half inches of additional ride height.  This will improve the stance that your Jeep has and it will do it in a cost efficient way.  All of the suspension systems and components that are made by Pro Comp are done so right here in the USA and they are all held to the utmost standards when it comes to things like durability, quality, functionality and strength.

Included Parts

When you purchase this particular lift kit you will get a pair of the ES9000 shocks that are made by Pro Comp.  There will also be another pair of these shocks, too…one pair for the front of your Jeep and another pair for the rear.  Each one of these pairs also comes with a set of the boots for the shocks.  Also included are coil springs for both the front and the rear and all of the U bolts that are needed. 

Pro Comp Suspension Bump Stops

Sometimes there are no words to describe what you are thinking and feeling – words are not enough.  Just as in that situation, there are times when your shocks absorbers are not enough to be able to keep your rig from bottoming out.  In cases like this you need another line of defense.  This other line of defense can be found with the suspension bump stops that are made by Pro Comp Suspension.

These bump stops are not just stronger than polyurethane bump stops, they are also more reliable.  The suspension bump stops that are made by Pro Comp Suspension work as a failsafe shock during those times when your shocks have been fully compressed.  They have a full 4 inches of travel and they will give you the heavy duty cushioning that you need right when you need it.  Additionally, they will not alter the quality of your ride like switching to shocks that are stiffer would.

Pro Comp made these bump stops to be tougher than the normal traditional shocks.  They are made from a 2 inch tube that has been burnished and skived.  This tube has then been filled with a mixture of nitrogen gas that has been pressurized to 200 psi and premium oil.  Then they added a chrome plated rod that measure an inch and a quarter in diameter and a piston head that has been made from billet aluminum.  That said, you can count on these bump stops to have the ability to soften the jarring from bottoming out.  The suspension bump stops that are made by Pro Comp Suspension also come with a mounting bracket that is universal and must be welded on as well as a warranty that is good for a lifetime.

Features at a Glance

·         The suspension bump stops that are made by Pro Comp Suspension come to you complete with a warranty that is good for a lifetime

·         The suspension bump stops by Pro Comp are sold individually

·         When you purchase the Pro Comp Suspension bump stops you will also get a mounting bracket that is universal and must be welded on

·         The suspension bump stops that are made by Pro Comp Suspension come to you complete with end caps that have been CNC machined

·         The suspension bump stops by Pro Comp Suspension have been filled with a mixture of nitrogen that has been pressurized to 200 psi and oil that is of race quality

·         The Pro Comp Suspension bump stops have been packed with a hardened rod that has been chrome plated and measures an inch and a quarter in diameter.  These rods are connected to piston heads that are constructed from billet aluminum

 

 

Pro Comp Suspension 4 Inch Travel Bump Stop

What are bump stops anyway?  They are a part that has been designed in such a way that they will improve the quality of your ride while they also work to protect the suspension of your rig.  Lift kits and lowering ones too are really fun until someone or even something get hurt.  If you have ever had the experience of bottoming out then you will be fully aware of the damage that can occur to both your back and your rig.  However, the blow can be softened with the addition of a high quality set of bump stops.

When you want to get the best protection that it is possible to get then you will want to choose the 4 inch travel bump stop that is made by Pro Comp Suspension.  Pro Comp Suspension has pushed the envelope and set the standard when it comes to the quality of your ride and the protection of your suspension. 

The 4 inch travel bump stop that is made by Pro Comp Suspension is universal.  It gives your suspension compression control when it bottoms out while not sacrificing the quality of your ride.  This 4 inch travel bump stop features a chrome plated rod that has been induction hardened that features a billet piston that has also been hardened.  The piston and the rod have been combined with a burnished and skived seamless tube that has an outer diameter of 2 inches.  The body of this bump stop has been given a protective finish of zinc plating.  This air bump stop is in the emulsion style which combines hydraulic oil and nitrogen gas.  The bump stop has been filled with race quality oil that is high grade in order to be resistant to thermal break down and foaming.  The nitrogen has been pressurized to a psi of 200.  The bump cap and the end cap are both made from anodized aluminum and have been CNC machined.  These caps have had the Pro Comp Suspension loge etched onto them by lasers.  Also included with the 4 inch travel bump stops is a mount that is to be welded on to allow for the bump stops to be custom mounted no matter what type of rig you have.

Features at a Glance

·         The 4 inch travel bmp stop that is made by Pro Comp Suspension has nitrogen gas that has been pressurized to a psi of 200

·         The end cap of this 4 inch travel bump stop by Pro Comp Suspension is made from anodized aluminum.  It is threaded and there is an o ring valve on it.  This end cap has been CNC machined and features the Pro Comp logo etched on it