Pro Comp Suspension Light Harness Switch Kit

Have you ever seen all of those 3W LED CREE bulbs that are lined up like cute little soldiers all along the front of your SEL Light Bar that is made by Pro Comp?  All of them look like they are just itching to begin lighting up the trails brilliantly – and you are probably equally excited to turn them on under the moon light.  The only problem is that there isn’t a way to turn them on.  So that you will be able to put these little soldiers to work, you will need the LED Light Harness Switch Kit that is another Pro Comp creation.

When you have this kit you will be able to forget all about unspooling all those yards of wire and heating up the soldering iron.  You will have everything that you need to be able to link your light bar into your existing 12V system.  This wiring harness has been designed specifically to be compatible with the SEL Light Bar made by Pro Comp.  It also has an in line fuse and a 40 amp relay so that the juice can keep flowing while your lights are protected from power surges.

This lighting kit that carries the Pro Comp name makes it incredibly easy for you to be able to tap into the power supply in your rig.  It also provides you with a great way to power your light bar…with a switch located in the cab.  All you need to do is to choose a spot on your dash and then screw the switch in using the hardware that is included with the kit and you are ready to go.  Wanna know the best part?  This comes with a warranty too!

Features at a Glance

·         This Light Harness Switch Kit comes to you complete with a warranty that is good for a full 90 days

·         Includes a 40 amp relay

·         Includes an inline fuse that will assist in protecting your lights from power surges

·         The included striker plate and in cab switch mean that it will be easy as 1 2 3 to turn your light bar on and off

·         Compatible with your 12V electrical system

·         Comes to you complete with all of the hardware as well as all of the connectors that will be required for a safe and proper installation and connection to your SEL bar

This Light Harness Switch Kit is Pro Comps way of making things easier for you.  Whether you are on the trail, or driving down the dirt road that leads you home, you will be able to have better visibility when you can actually turn your light bar on once this kit has been properly installed.

Pro Comp Suspension 2.5 Inch Lift Kit with ES9000 Shocks

This suspension system that is brought to you by the minds at Pro Comp is meant for use on the Jeep WranglerJK, the Unlimited and the Jeep Rubicon with model years falling between 2007 and 2015.  It is compatible with the 2 door models as well as the 4 door models.  The front end lift is achieved by the use of lifted coil springs and the rear lift is achieved the same way.  Everything that you will need in order to complete the installation safely and properly is included in this kit.  You will even get the ES9000 shocks as well as the shock boots for both the front of the Jeep and the rear of the Jeep.  With this suspension lift on your Jeep, you will be able to accommodate tires of up to 35 inches in diameter and a wheel size of up to 16 inches.

Pro Comp makes suspension systems and components for off road vehicles.  They don’t just make them though, they are off road enthusiasts themselves.  Each one of the products that they make reflect the type of technology that is not just driven by customers, it is technology that has been race inspired.  The engineering involved has tunnel vision on techniques and processes used for manufacturing that are actually world class.  When it involves how your Jeep handles, looks and performs, you don’t make any sort of compromises and neither does Pro Comp.  Whether you happen to be in the middle of town or out on the trails somewhere, a suspension system made by Pro Comp will get you where you are going and back again.

With this 2.5 inch suspension kit that carries the Pro Comp name, you will get the expected 2 and a half inches of additional ride height.  This will improve the stance that your Jeep has and it will do it in a cost efficient way.  All of the suspension systems and components that are made by Pro Comp are done so right here in the USA and they are all held to the utmost standards when it comes to things like durability, quality, functionality and strength.

Included Parts

When you purchase this particular lift kit you will get a pair of the ES9000 shocks that are made by Pro Comp.  There will also be another pair of these shocks, too…one pair for the front of your Jeep and another pair for the rear.  Each one of these pairs also comes with a set of the boots for the shocks.  Also included are coil springs for both the front and the rear and all of the U bolts that are needed. 

Pro Comp Suspension Bump Stops

Sometimes there are no words to describe what you are thinking and feeling – words are not enough.  Just as in that situation, there are times when your shocks absorbers are not enough to be able to keep your rig from bottoming out.  In cases like this you need another line of defense.  This other line of defense can be found with the suspension bump stops that are made by Pro Comp Suspension.

These bump stops are not just stronger than polyurethane bump stops, they are also more reliable.  The suspension bump stops that are made by Pro Comp Suspension work as a failsafe shock during those times when your shocks have been fully compressed.  They have a full 4 inches of travel and they will give you the heavy duty cushioning that you need right when you need it.  Additionally, they will not alter the quality of your ride like switching to shocks that are stiffer would.

Pro Comp made these bump stops to be tougher than the normal traditional shocks.  They are made from a 2 inch tube that has been burnished and skived.  This tube has then been filled with a mixture of nitrogen gas that has been pressurized to 200 psi and premium oil.  Then they added a chrome plated rod that measure an inch and a quarter in diameter and a piston head that has been made from billet aluminum.  That said, you can count on these bump stops to have the ability to soften the jarring from bottoming out.  The suspension bump stops that are made by Pro Comp Suspension also come with a mounting bracket that is universal and must be welded on as well as a warranty that is good for a lifetime.

Features at a Glance

·         The suspension bump stops that are made by Pro Comp Suspension come to you complete with a warranty that is good for a lifetime

·         The suspension bump stops by Pro Comp are sold individually

·         When you purchase the Pro Comp Suspension bump stops you will also get a mounting bracket that is universal and must be welded on

·         The suspension bump stops that are made by Pro Comp Suspension come to you complete with end caps that have been CNC machined

·         The suspension bump stops by Pro Comp Suspension have been filled with a mixture of nitrogen that has been pressurized to 200 psi and oil that is of race quality

·         The Pro Comp Suspension bump stops have been packed with a hardened rod that has been chrome plated and measures an inch and a quarter in diameter.  These rods are connected to piston heads that are constructed from billet aluminum

 

 

Pro Comp Suspension 4 Inch Travel Bump Stop

What are bump stops anyway?  They are a part that has been designed in such a way that they will improve the quality of your ride while they also work to protect the suspension of your rig.  Lift kits and lowering ones too are really fun until someone or even something get hurt.  If you have ever had the experience of bottoming out then you will be fully aware of the damage that can occur to both your back and your rig.  However, the blow can be softened with the addition of a high quality set of bump stops.

When you want to get the best protection that it is possible to get then you will want to choose the 4 inch travel bump stop that is made by Pro Comp Suspension.  Pro Comp Suspension has pushed the envelope and set the standard when it comes to the quality of your ride and the protection of your suspension. 

The 4 inch travel bump stop that is made by Pro Comp Suspension is universal.  It gives your suspension compression control when it bottoms out while not sacrificing the quality of your ride.  This 4 inch travel bump stop features a chrome plated rod that has been induction hardened that features a billet piston that has also been hardened.  The piston and the rod have been combined with a burnished and skived seamless tube that has an outer diameter of 2 inches.  The body of this bump stop has been given a protective finish of zinc plating.  This air bump stop is in the emulsion style which combines hydraulic oil and nitrogen gas.  The bump stop has been filled with race quality oil that is high grade in order to be resistant to thermal break down and foaming.  The nitrogen has been pressurized to a psi of 200.  The bump cap and the end cap are both made from anodized aluminum and have been CNC machined.  These caps have had the Pro Comp Suspension loge etched onto them by lasers.  Also included with the 4 inch travel bump stops is a mount that is to be welded on to allow for the bump stops to be custom mounted no matter what type of rig you have.

Features at a Glance

·         The 4 inch travel bmp stop that is made by Pro Comp Suspension has nitrogen gas that has been pressurized to a psi of 200

·         The end cap of this 4 inch travel bump stop by Pro Comp Suspension is made from anodized aluminum.  It is threaded and there is an o ring valve on it.  This end cap has been CNC machined and features the Pro Comp logo etched on it

 

Pro Comp Suspension CV Style Drive Shaft

The CV style drive shafts that are made by Pro Comp Suspension have been designed specifically for use with the Pro Comp Suspension slip yoke eliminator kits.  These drive shafts are in the 2 piece style and they have been constructed from steel of a very high quality.

Specs

This CV style drive shaft is for use with Pro Comp’s slip yoke eliminator.  When the drive shaft is collapsed it measures 17 inches.  When it is extended it measures 21.5 inches.  This drive shaft has been made specifically for use on Jeeps that have been given a lift of 4 to 5 inches.  This is a drive shaft in the CV style.  This style brings you only the best of factory made products as well as drive shafts that have been custom made.

Construction

Pro Comp has been known for creating solutions that are unique and innovative for dilemmas that Jeep owners often face.  This particular drive shaft is rugged and high quality.  It will give you a ride that is smooth without you having to worry about any sort of play or slop.

Application

This particular CV style drive shaft is compatible with the Jeep Wrangler YJ with a model year falling between 1987 and1993 if the Jeep has had a lift of 4 – 5 inches.

Features at a Glance

·         This CV style drive shaft that is made by Pro Comp Suspension has an extended length of 21.5 inches

·         The CV style drive shaft by Pro Comp suspension has a length of 17 inches when it is collapsed

·         The Pro Comp Suspension CV style drive shaft is a drive shaft that h=consists of 2 pieces

·         The CV style drive shaft that is made by Pro Comp Suspension has been made specifically for the Jeep Wrangler YJ with a model year falling between 1987 and 1993

·         This CV style drive shaft by Pro Comp Suspension is only for use with those Jeeps that have been given a lift of 4 – 5 inches

U Joint Style Drive Shaft

For those who need a drive shaft in the U joint style, Pro Comp makes that too.  These U joint style drive shafts will give you the ideal method of upgrading you Jeep JK 2007 or 2008 that has been given at least a 2 inch lift.  

When a Jeep has been lifted, the angles for the driveline are increased as a result.  This increases the chances of there being vibration in the driveline.  With this Pro Comp Suspension made U joint style drive shaft, when your Jeep gets above 25 miles an hour the vibration is reduced.  This kit comes with all of the hardware that is necessary for a proper and safe installation including detailed instructions.

 

Pro Comp Suspension Dual Steering Stabilizer Kit

Jeeps that go off road and monster tires go together like peanut butter and jelly.  There is a problem with the combination though.  The larger tires can actually cause not just bump steer but also a whole world of other issues with your handling.  All of that can be corrected with the right part though and that part is the dual steering stabilizer kit that is brought to you by Pro Comp Suspension.

In all actuality, these kits are available in a single steering stabilizer or the dual steering stabilizer and what you will need will depend on the type of Jeep that you have.  The point is that these steering stabilizers will reduce vibrations as well as bump stop as well as the arm fatigue that you will get from those issues.  It does this by smoothing out the overall handling of the Jeep.

The dual steering stabilizer kit that is made by Pro Comp Suspension has been made specifically for your Jeep’s year and model.  In this kit you will get not just the steering stabilizers but also the custom mounting brackets and hardware that you will need in order to install them.  Additionally, all of the dampening is taken care of with the ES2000 Series shocks that are made by Pro Comp Suspension.  That isn’t all though.  Pro Comp Suspension backs their dual steering stabilizer kit with a warranty that is good for a lifetime!

The ES2000 steering stabilizers that are made by Pro Comp Suspension have been engineered specifically to improve the handling characteristics of your Jeep as well as to reduce vibration from the wheels.  This wheel vibration can lead to fatigue and even failure of your suspension components.  This will also correct the bump steer issues that are caused by rough roads and massive tires.

Features at a Glance

·         The dual steering stabilizer kit that is made by Pro Comp Suspension requires the use of your factory installed lower shock mounts

·         The dual steering stabilizer kit by Pro Comp Suspension includes the bracketry that is needed for installation as well as the dual ES3000 Series stabilizer shocks

·         The Pro Comp Suspension dual steering stabilizer kit comes to you complete with a warranty that is good for a lifetime

·         You can choose from the single or the dual steering stabilizer kit that will depend on your Jeep

·         The dual steering stabilizer kit that is made by Pro Comp Suspension will reduce you wheel vibration

·         The dial steering stabilizer kit by Pro Comp Suspension will drastically improve your handling

·         The Pro Comp Suspension dual steering stabilizer kit will minimize your bump steer issues that are caused by rough roads and massive tires

Pro Comp Suspension 6 Inch Lift Front Coil Springs

Some people go out and spend a few thousand on a new suspension just to try to win over a country girl while others do it to be able to conquer the off road terrain.  However, most of the time, no matter what your reason is for getting a new suspension system, you will still need to drive on paved roads more than on trails, dunes or other terrain.  However, you will be able to get a large amount of lift without a large price tag if you know where to look.  Here is what you need to know.

Nitro Lift Kit by Pro Comp

With this lift kit you can make room for that larger wheel and tire package without deflating your wallet.  This is your economical choice when you are looking to get more lift for your money.  This kit uses a leveling kit in the front while using a block kit in the back.  This kit will allow you to get that higher from the ground off road look while still allowing you to retain the steering geometry installed by the factory as well as your factory ride quality. 

The Nitro Kit is designed by Pro Comp for your specific rig and in doing so, they include all of the parts that you will need in order to get an installation that is easy, fast and budget friendly.  These kits are also backed by a lifetime warranty.

Features at a Glance

·         Each one of the Nitro Lift kits made by Pro Comp comes to you complete with a lifetime warranty

·         Because these kits are custom made for your specific application, installation is easy peasy

·         Each one of these kits comes to you complete with a finish that is resistant to rust

·         The coil spacers found in this kit are completely machined from high quality steel

·         All of the strut spacers that are found in these kits have been formed from either a heavy duty steel or from billet aluminum

·         All of the torsion keys that are found in these kits have been CNC machined and then forged to give them the maximum amount of strength

·         This kit will give you up to an additional 6 inches of lift and will give you the room you need for those larger wheels and tires

·         This kit will allow you to retain your ride quality as well as your steering geometry

·         The rear lift is achieved through the use on either lift blocks, leaf spring shackles or coil spring spacers depending on the application

·         Front lift is achieved by using either strut spacers, torsion keys or coil spring spacers depending on your application